| Availability: | |
|---|---|
| Quantity: | |
Refurbished 6-axis industrial robot arm configured for woodworking production — It could largely widely help work in woodworking industry , plywood ,
mdf laminated line auto loading and unloading in the sanding, polishing and spray painting process .
![]() | ![]() | ![]() |
![]() | ||
| Model | Payload | Reach | Axes | Repeatability | Year |
| KR QUANTEC-2 | [300 kg] | [2,700 mm] | [6] | [±0.05 mm] | [2016] |
This model KRQUANTEC-2 is a six-axis industrial robot arm with [300 kg] payload and [2,700 mm] reach, rebuilt for woodworking duty.
It is the size that fits most Standard size wood board : plywood panel ,particle board, mdf board , (size 4x8ft ,5x10ft ) . heavy enough
to carry a vacuum gripper plus a full-size MDF or plywood panel, and long enough to reach from a stack through the machine envelope
to the outfeed table without repositioning the base.
The unit is supplied as an arm with its controller, teach pendant and main cable. End-of-arm tooling, vacuum grippers, fixtures, guarding
and safety circuits are engineered per project and are not included unless agreed separately.
Suits CNC router loading/unloading, edge bander tending, sanding and spray lines
Controller generation and installed software options confirmed before shipment
we supply the matched woodworking conveyor ,roller conveyor ,lift table and other matched parts ,just tell me where and which
function you want use it ,we will supply complete series control system and mechnical parts .
| Model | KR QUANTEC-2 |
|---|---|
| Brand | [KUKA / FANUC / ABB / Yaskawa] |
| Year of manufacture | [2016] |
| Condition | Used — inspected, serviced and load-tested |
| Number of axes | 6 |
| Payload | [300 kg] at the wrist |
| Reach | [2,700 mm] |
| Repeatability | [±0.05 mm] |
| Controller | [KRC4 / R-30iB / IRC5] with teach pendant |
| Mounting | Floor (wall / ceiling on request) |
| Protection class | [IP65 body, IP67 wrist] |
| Robot weight | [1,100 kg] |
| Running hours | [on request / approx. 12,000 h] |
| Power supply | 3 × 380 V / 50 Hz (other voltages on request) |
| Country of origin | [Germany / Japan] |
Photos show the model and its typical configuration. The actual unit may differ in paint, cabling and wear —
nameplate details are confirmed per unit before shipment.
CNC Router Loading & UnloadingFeeds panels onto the nesting table and removes finished parts, so the spindle keeps cutting instead of waiting for an operator. | Particle board MDF Laminated lineDuring the particle board and mdf laminated line the robot arm could replace the conveyor roller it could infeed ,outfeed and turnover ,then stack wood panel accurately ,and fast.save the space largely . |
![]() | ![]() |
Spray PaintingConsistent gun distance and overlap for lacquer and coating lines. Explosion-proof versions quoted separately for ATEX zones. | Sanding & PolishingConstant pressure and repeatable path on curved and profiled parts — doors, frames, chair components and solid-wood panels. |
Every unit goes through the same check before it is listed as available:
Mechanical inspection of all six axes — backlash, abnormal noise, reducer play
Servo and brake test under load through the full working envelope
Cabling and connector inspection; dress pack replaced where worn
Controller power-up with alarm history readout and parameter backup
Paint touch-up and cleaning; worn parts replaced with OEM or compatible spares
Photos, nameplate close-up and a running test video sent to the buyer before shipment
The arm is delivered with its matching controller and pendant. Fieldbus options, I/O boards and interface cards are verified
against the actual cabinet before shipment.
If your CNC router, edge bander or paint line needs a specific handshake — cycle start, door open, part-in-place, vacuum
status — send us the machine brand and control type. We confirm whether the existing cabinet supports it, or quote the additional I/O module.
A used robot arm is not a plug-and-play machine. You need either in-house integration capability or an integrator on
site for tooling, guarding and the safety circuit. Before ordering, confirm three things:
Payload — heaviest workpiece plus gripper weight, with at least 20% margin
Reach — measured from the base position to the farthest pick and place point, not the machine centre
Floor & power — foundation loading, footprint, and whats the electric voltage .
Work function ,where and how you want to use it , we will design a match control system for you