 |
| Quantity: | |
|---|---|
Product Advantage
Veneer patching machine is used in plywood production line to patch the natural defect and hole that exists in veneer surface. this is semi-automatic wood veneer patching machine, our machine is workable for soft wood veneer and hardwood veneers,
we have simi Automatic model and manual model .
from Our veneer patcher machine, many patcher size are selectable. the largest up 150mm | the veneer after patching machine is strong, it could go though next plywood production process- plywood glue spreader machine |
 |  |
Technical Parameters
Model | PRSVPST84B |
Veneer thickness | 1.3~3.6mm |
Veneer size | 8x4ft, long grain veneer |
The patch piece size | Customized |
Speed | 1.5~3s/ piece |
Voltage | 220v/380v/480v |
Power | 3kw |
Compressed Air | 0.5Mpa |
Main power control | Hydraulic system |
Auto strip feeder | Auto |
Control | Foot switch control |
Machine size | 3.5m x1.1x2.1m |
Machine weight | 1500kg |
Simi Automatic veneer patching machine
Suit for short grain veneer( cross veneer ) and long gain veneer ,our veneer patcher machine have 2 models. A and B | |
Model A : Suit for short grain veneer /cross veneer 4x8ft  | Model B : Suit for long grain wood veneer 8x4ft  |
Manual veneer patching machine
the manual veneer patching machine need 2 machine 1st is for dig hole ,remove the hole area from the veneer 2st is make patcher then manually put the patcher on the hole veneer . it is used on veneer has large defects . |
 |
