Plywood Laminted Layup Line Second Hot Press Plywood

Product Introduction

The plywood veneer laying process is generally integrated with a glue spreader. After being glued by the glue spreader, the veneers are manually assembled and laid according to different grain directions to meet panel design requirements.

Due to differences in wood raw material characteristics and local production processes, the specifications of glued and laid veneer grains vary from country to country.

In countries such as China, Vietnam and India, the mainstream product is 4×2ft veneer, with production processes focusing on cross veneer composer and finger jointing. Accordingly, the production lines are mainly equipped with specialized veneer paving lines( as the following type 3 ), or a combination of 4ft glue spreading lines and laying lines( as the following type 2 )

In regions with abundant wood resources, including Europe, Turkey, Russia and Latin America, full-size veneers can be produced directly. Local manufacturers commonly adopt short-grain veneers for gluing, and the production lines are mostly equipped with 8ft glue spreaders( as the following type 1 )

Product Uses

Type 1 : 8ft glue spreader + veneer conveyor (https://www.youtube.com/embed/pzocPuKkruk )		Type 2 : 4ft glue spreader + veneer conveyor (https://www.youtube.com/embed/6oQatuI5TtI)
Suit for short grain veneer	Horizontal composed veneer
Type3 : 4ft glue spreader + veneer paving line (https://www.youtube.com/embed/PEGpCnnzc8E )		Type 4 : plywood lamninated line (Auto plywood loading + 4ft glue spreader + Auto plywood unloading ) ( https://www.youtube.com/embed/2tFKurZ5jL0?si=vXeBCxsPoLzk5jcM)
Suit for small size veneer, as 4x4ft or 4x2ft veneer . this veneer paving line ususally work with a veneer conveyor line, to reduce labor work and increase capacity as the following drawing. This working way is popular in China, Vietnam, and India		This equipment is designed for re-formed plywood, which refers to plywood processed with two hot-pressing procedures. After the second hot-pressing is completed, the panels are first sanded, then re-laminated on the face and back with decorative materials such as melamine paper, film paper or wood veneer. The main function of this production line is to realize automatic feeding and discharging of plywood, which reduces manual labor intensity and greatly improves production efficiency and speed.